Atmel CAMELIA 8M Manual do Utilizador descarregar pdf (Página 2)

CAMELIA M1 8M LVDS and CameraLink

Camera

5319C–IMAGE–02/04

Improvements The Camelia 8M has been redesigned to:

• Add new features, which include:

– Gain: 941 steps from -6 to 27 dB

– Offset: 0 to 255 LSB

– Test pattern: ramps up from 0 to 2298 pixel values on each line

– Median filter: to remove 1 x 1 and column defects

– 12 or 8 bits output format selection

• Improve the electro-optical performances, in particular by:

– Reducing power consumption from 8.5 to 5.5W, using a new front panel and

internal heat sink. This lowers the CCD temperature by 5° C, thus decreasing

the magnitude of “white pixels”.

– Decreasing the typical temporal noise from 2.7 to 2.4 LSB

• Interface with more standard and more cost-effective cables

• Improve reliability

The Camelia M1 8M is CE and FCC compliant.

Main changes for the user include:

• New additional commands for gain, offset and test pattern

• Interface connectors:

– DATA & SYNC are 3M MDR connectors with improved availability, the same

pinout but different mechanics

– The RS-232 is a D-Sub 9 female connector for full-duplex transmission

– The power supply connector has a camera standard pinout

– The TTL CONTROL is a new D-Sub 9 male connector avoiding the use of a

Y cable

• A new rear panel (see position of connectors on Figures 1 and 2 on page 3.)

1 2 3 4 5 6 7 ... 36 37

Sem comentários

Atmel CAMELIA 8M Manual do Utilizador Página 2